* USA SELLER* SuperMicro SYS-F617R2-FT 4U SuperServer

Description

Product SKUs
SYS-F617R2-FT
SuperServer F617R2-FT (
Black
)
Motherboard
Super X9DRFF
Processor/Cache
CPU
Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
and
E5-2600 v2
family
†
(up to 135W TDP *)
* Please contact your Supermicro sales representative for additional details
Note
† BIOS version 3.0 or above is required
Cache
Up to 30MB
System Bus
QPI up to 8 GT/s
System Memory (per node)
Memory Capacity
8x 240-pin DDR3 DIMM slots
Up to 512GB DDR3 ECC LRDIMM
Up to 256GB DDR3 ECC Registered memory (RDIMM)
Up to 64GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
1.5 V, 1.35 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
Intel® C602 Chipset
AHCI SATA
SATA 2.0 3Gbps with RAID 0, 1
SATA 3.0 6Gbps with RAID 0, 1
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers
Intel® 82574L Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
Matrox G200eW
Input / Output (per node)
AHCI SATA
2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps)
LAN
2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
2x USB 2.0 ports
VGA
1x VGA port
Serial Port / Header
1x Fast UART 16550 port
Chassis
Form Factor
4U Rackmount
Model
CSE-F418IL-R1K62BP
Dimensions
Width
17.63" (448mm)
Height
6.96" (177mm)
Depth
29" (737mm)
Package
28.3" (W) x 15.0" (H) x 42.4" (D)
Weight
Net Weight: 150 lbs (68.04 kg)
Gross Weight: 200 lbs (90.71 kg)
Available Colors
Black
Front Panel
Buttons
Power On/Off button
System Reset button
LEDs
Power status LED
2x Network activity LEDs
System Overheat LED
Power fail LED
Expansion Slots (per node)
PCI-Express
1x PCI-E 3.0 x16 Low-profile via riser card
Drive Bays (per node)
Hot-swap
2x Hot-swap 2.5" SATA HDD trays
System Cooling
Fans
8x 8cm 11k RPM middle fans
Power Supply
1620W high-efficiency redundant power supply w/ PMBus
AC Input
1000W Output @ 100-120V, 12-10A, 50-60Hz
1200W Output @ 120-140V, 12-10A, 50-60Hz
1620W Output @ 180-240V, 10.5-8A, 50-60Hz
DC Output
1000W: +12V/84A; +5Vsb/4A
1200W: +12V/100A; +5Vsb/4A
1620W: +12V/150A; +5Vsb/4A
Certification
Platinum Certified
[
Test Report
]
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI
Operating Environment / Compliance
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
See Parts List
Parts List - (Items Included)
Part Number
Qty
Description
Motherboard / Chassis
MBD-X9DRFF
CSE-F418IL-R1K62BP
8
1
Super X9DRFF Motherboard
4U Chassis
Backplane
BPN-SAS-F418-B2R
8
Backplane for two 2.5" hogplug SAS/SATA hard drives (HDD & SSD), no SGPIO/SES/i2c support, for Fat Twin Chassis.
Cable 1
CBL-0483L
16
29cm 30AWG SATA S-S cable
Cable 2
CBL-0486L
8
2x2 to 2x2 15cm power cable HF. 18AWG
Riser Card
RSC-R1UFF-E16
8
1U LHS FatTwin Riser Card with PCI-E x16
Heatsink / Retention
SNK-P0047PF
8
1U Passive Rear CPU Heat Sink for 1U Node Rear I/O Fat Twin Servers
Heatsink / Retention
SNK-P0047P
8
1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Square ILM MB
Mounting Rail
MCP-290-41803-0N
1
Fat twin F418 / F424 Rail set support 28-33.5 inch depth rail,RoHS/REACH,PBF
Optional Parts List
Part Number
Qty
Description
Software
SFT-OOB-LIC
8
OOB Management Package (per node license)
Software
SFT-DCMS-Single
8
DataCenter Management Package (per node license)
Terms and Conditions
Hours of Operation
Our business hours are 10am to 5pm PST Monday through Friday. All email requests will be addressed within 24 hours.
Returns or Exchanges
Returns postmarked within 30 days of the delivery of the original shipment will be accepted with 20% restocking fee, no returns allowed after
30 days. All returns must be approved by Customer Relations who will issue a Return Merchandise Authorization (RMA) number. If the item is defective and is under warranty, please contact us and we will assist you in pursuing a warranty claim with the manufacturer.
Payment
We proudly accept PayPal. If another form of payment needs to be used please contact us first. We can work with most payment methods. California residents will be charged sales tax.
Shipping Info
We ship items worldwide, including APO / AEO address, via Fedex or US Postal Service.
Items will be shipped within 2 business days upon receiving payment although in most cases they are shipped same or next day. Feel free to email us to confirm product availability and shipping date.
On May-18-12 at 01:07:15 PDT, seller added the following information:
FREE! Sellers: Add a FREE map to your listings. FREE!